The post Link Test Page appeared first on 糖心Vlog.

The post Form Redirect Test appeared first on 糖心Vlog.

As we saw in 糖心Vlog Service Manager John鈥檚 recent Service Questions, a common area on rock crushing equipment that leads to constant questions is the conveyors. From conveyor belts not staying aligned to head pulley slippage, there are various items on the conveyors that require preventative maintenance and routine checks. Service Technician, Dakota, will run through the various questions that come from conveyor maintenance.

Conveyor Maintenance at a Glance

Common issues with conveyors involve the belt. For this Service Question, we will focus on the conveyor belt itself and not the motors or bearings involved in the pulleys. A common issue is the conveyor belt not staying centered. This can be caused by:

• Uneven Loading
  • To fix this, you should adjust the loading to be more even by dumping from a chute to the center of the conveyor belt.
• Worn or Misaligned Components (Pulleys, Idlers)
  • Check for worn or misaligned components by inspecting all pulleys and idlers to ensure they are free of any built-up material and ensure that the pulleys and idlers are properly aligned.
• Incorrect Tension or a Crooked Belt Splice

听How often should conveyor belts be inspected or spliced?

Conveyor belts should be inspected daily to ensure the health and performance of the conveyor. You should be looking for various types of conveyor belt damage, such as cuts, frays, cracks, and wear. Make sure to clean off any debris buildup on the belt, pulleys, and rollers. Also, do a visual inspection to see if the conveyor belt is tracking straight and the splice is in good condition. Listen for unusual noises while in operation, such as grinding or squeaking, which could be misaligned or failing components.

How do I set proper belt tension?

Put marks on the nontensioned belt at exactly 1000 mm from the splice. The marking must be done on the left and right side of the conveyor belt. Tension the belt and let it turn a few times to equally divide the tension. Then, measure the elongation and adjust the belt tension if necessary. See your owner鈥檚 manual for the recommended elongation of the conveyor belts.

What is causing slippage at the head pulley?

To drive a conveyor belt without slippage, and to track it in a proper way, a certain tension of the conveyor belt is necessary. See your owner鈥檚 manual for the recommended tension.

Built up materials such as fines material will increase the friction between the conveyor belt and the head pulley, so it is very important to clean your conveyor properly. If slippage continues the belt could damage the lagging of the head pulley by rubbing it smooth, causing it to struggle to grip the conveyor belt.

An example of a head pulley that is missing half the lagging.

How can I reduce material buildup under the conveyor belt?

You can reduce the buildup under a conveyor belt by ensuring the belt flashing or skirting is in good condition and making good contact with the conveyor belt. The skirting is adjustable by clamp plates. To adjust the skirting to avoid gaps in the flashing, simply loosen the clamp plates and pull the skirting down. If you can no longer pull the skirting down, you need to order new belt skirting.

After you have made sure your belt skirting is adjusted properly, inspect your belt scrapers and ensure they are making good. If the belt scrapers are not making good contact, adjust the scraper toward the belt by loosening the tensioner retainer screw and put tension on the scraper. You can do that by using a wrench to build tension, then tightening the retainer screw back down.

Don鈥檛 Let the Tension Get to You 鈥� Reach Out!

As you already know, a simple-looking part in rock crushing equipment doesn鈥檛 always mean it鈥檚 immune to preventative maintenance. What is simple is knowing the resources available to you. Not only do you have your owner鈥檚 manual, but you have a network of authorized dealers, a team of 糖心Vlog parts experts, and 糖心Vlog Service Technicians ready to help keep your tension to a minimum.

The post The Tension with Conveyor Belt Maintenance appeared first on 糖心Vlog.

Now that Spring is officially here, that means warmer temperatures to help with the startup of the plants that were听hibernating听over the winter.听Let鈥檚听get you听up and听crushing听it by looking over some of the following听recommendations for your听plant prior to starting up.听听

The following recommendations assume that you followed the听appropriate procedures听to shut down the equipment. If you are unaware of the听shutdown听procedures, please check out听this blog.听

Your service manuals and vendor books have more detailed information and some of the following information may not apply to your equipment. If you have more questions regarding your specific equipment, reach out to our service team.听

听

Starting Up Feeder Drives and Screens听

Different types听of feeder drives, such as Simplicity and Diester, may have different specific instructions. If you are not sure of the听appropriate start-up听procedures, refer to your service manuals, vendor books, or reach out for specific information on your plant.听

Prior to placing the Deister vibrating feeder drive and screen back into operation, drain oil from the mechanism tube and refill with the correct type and amount of oil.听

To place听a simplicity vibrating听feeder听drive听and screen听back in operation, remove plugs, re-install the vents, run for听40 hours,听then change the oil.听

听

Torque-Arm Speed Reducers听

If you听drained听the oil due to your equipment being inactive for a period of 3 months or more, replace the oil with a vapor听phase听corrosion inhibiting oil.听

听

Starting Up Gasoline-Powered Hydraulic Unit听

When you start up your听equipment听the valves will open and close normally as the engine is starting.听It鈥檚听recommended that you change the oil if you did not do it prior to shutting off.听听

听

Starting Up Diesel Engines听

Each engine manufacturer (e.g.听John Deere, CAT, etc.) has different procedures for their engine. See the engine manual shipped with the original purchase of the equipment for the proper procedure.听

鈥�听

Spring to your machine鈥檚 start up procedure.听

Following the above recommendations, and any recommendations found in your owner鈥檚 manual, you should be up and crushing it in no time. Don鈥檛 forget to order any spare parts you might need throughout your crushing journey. While it might not seem like an important step in your start up procedure, it could help you save downtime. Reach out to an 糖心Vlog Parts Expert to see what parts are recommended that you have on hand.听

If you have questions about other parts of your machine, reach out today. Our听authorized听dealers听and听service representatives听are ready to听assist听you to get you up and running appropriately.听听

The post Starting Up Your Crusher After a Period of Inactivity appeared first on 糖心Vlog.

Different material processing jobs present unique challenges, and with the current world market, buying the right crushing equipment is critical to keeping your company up and crushing. One of the first questions people often ask about crushing equipment is whether they should buy a portable rock crusher or a mobile one.

Although these styles of rock crusher plants may appear similar, their distinctions could impact the profitability of your business and deserve a closer look. Here, we explore the key differences between mobile and portable rock crushers, helping you determine which type best suits your specific crushing needs.

Comparing Mobile vs. Portable Rock Crushers: At a Glance

Mobile Rock Crushers

Mobile rock crushers are specialized equipment used in mining and construction industries to break down large rocks into smaller pieces. Here’s an overview of mobile rock crusher advantages and disadvantages:

Pros:

• Self-propelled design significantly reduces time and labor required to move machines between job sites
• Track-based mobility allows navigation of difficult terrain that wheeled units struggle with

Cons:

• Complex mobile plants (especially those with screens on discharge conveyors) often require partial disassembly before relocation
• Compact design results in minimal clearance, making maintenance and servicing difficult
• Compromised distance between crusher discharge and plant belt
• Limited space and smaller feed hoppers compared to portable plants lead to reduced production capacity
• Transportation challenges may require specialized trailers or multiple loads for larger units

—

Portable Rock Crushers

Portable rock crushers offer an alternative to mobile units with their own set of advantages and limitations. Here’s what you should know about portable rock crusher benefits and drawbacks:

Pros:

• Superior production capacity generates higher volume of end products than comparable mobile plants
• Maximized space design allows steel and large-volume materials to pass efficiently onto the plant discharge belt
• Open design facilitates easier maintenance, reducing downtime
• Versatile screening capabilities鈥揷an feature two or three-deck screens to produce multiple products simultaneously

Cons:

• Generally require tractors for movement around job sites
• Larger portable plants typically need partial disassembly for transport (hopper feeder, magnet, etc., may need separate trailers)
• Some specialized models like RapiDeploy庐 plants are available as single-pull units

Frequently Asked Questions About Mobile vs. Portable Rock Crushers

What are the main differences between mobile and portable rock crushers?

Mobile crushers are self-propelled and can move around the job site, while portable crushers require towing for transportation.

Which type is better for frequently changing job sites?

Mobile rock crushers are generally better suited for projects that require frequent relocation due to their self-propelled nature and quick setup time.

Are portable crushers less efficient than mobile crushers?

Not necessarily. Portable crushers can be just as efficient and sometimes offer larger capacities, making them ideal for longer-term projects.

Can both types of crushers handle the same materials?

Yes, both mobile and portable crushers can process a wide range of materials, including rock, concrete, and asphalt, depending on the specific model and configuration.

How do I choose between a mobile and a portable rock crusher?

Consider factors such as the frequency of relocation, project duration, site conditions, and required capacity. Consult with a crushing equipment expert to determine the best option for your specific needs.

Find the Right Rock Crusher with 糖心Vlog

When it comes to mobile vs. portable rock crushers, it鈥檚 crucial to consider your business needs and applications to select the right one. Ready to find the perfect mobile or portable rock crusher for your project? Contact 糖心Vlog today, or an authorized dealer, for expert advice and a free consultation. We鈥檙e here to answer your questions and help you find the best equipment for your site!

The post Mobile vs. Portable Rock Crushers: Choosing the Right One appeared first on 糖心Vlog.

It鈥檚 been a year since John stepped into the role of Service Manager. Throughout this time, he has established relationships with various authorized dealers and customers by answering their burning crusher questions. While answering these questions, he noticed several questions were recurring. To celebrate his first year as Service Manager, join John as he answers the top five frequently asked questions he鈥檚 received.

1. Why is my clutch fusible plug leaking fluid?
   • Your impactor may be getting overloaded and therefore overheating the clutch. The plug has a solder compound in it so that if the fluid in the clutch gets too hot, the fluid will leak out. This is done to prevent overheating and the possibly of causing permanent damage to the clutch.
   • Another solution would be to learn the proper flow of material for your machine to avoid overloading your impactor. Overloading your impactor causes a variety of issues, so it鈥檚 important to start with good practice to avoid any unnecessary downtime.

An example of good material flow.

2. Why isn鈥檛 my machine running evenly? Why are my conveyor belts wearing unevenly?
   • One of smallest differences that can cause significant issues in your machine is your machine not being level. If your machine is not level, it will cause material to shift and not run evenly through the plant. This can lead to belts leaking materials, flashings being worn out, wear plates and blow bars wearing unevenly and will affect the performance of the feeder and screen.

3. Why is there a gap in the flashing?
   • Flashing is adjusted to the belts when the unit is built and tested in the factory. Once material is on the belts, they have weight added onto them, causing the belt to sag. That is why you see gaps between the belts and flashing. After your first couple of runs, the skirtboard clamps will need to be loosened, and the flashing adjusted accordingly.

4. Why did my feeder shut off, and my code says low voltage? Is it because there鈥檚 too much material on my screen?
   • When it comes to the feeder shutting off, most of the time the drive belt just needs to be tightened or replaced. If the drive belt looks to be good, a worn-out drive sheave could also cause a low voltage code.
   • When it comes to the level of material on your screen and feed issues, it鈥檚 important to adjust the feeder belt speed to accommodate the screen. Once the machine is up and crushing, watch the material flow on the belts and screen. If there seems to be a small amount of material on the belts and the screen isn鈥檛 loaded, you can turn the feeder up to feed more material to the impactor. On the other hand, if the belts look overloaded and screen is backing up or getting material over the sides turn the feeder down to decrease the flow.

5. Why does one blow bar have more material above the locking rod pocket when I pull them to flip?
   • If there is extra material in the pocket, it might have been from the wedge being loose. When replacing the blow bars, you need to tighten the wedge screws in each wedge. When flipping or replacing the blow bars, do not torque and insert set screw and glue at first. Once everything is properly set, and the lid is properly closed, turn on the crusher and let it get up to speed. Doing this allows the blow bars to 鈥渟eat鈥� or pull out as far as they can against the locking rod. If the bar moves when the impactor is started, you may hear a loud bang. That is the bar moving into place as the rotor gets up to speed. After it has been run at full speed for a little bit, follow the proper lock out / tag out procedures prior to opening the lid again. At this point, retighten the wedge bots and torque to the recommended setting.
   • As a side note, when you insert the set screws, you can insert a small amount of paper towel to help keep the hex in the cap screw from filling with glue.
   • For more information about flipping blow bars, check out this previous Service Question with James.

Knowing Who to Call

The last year of being in the service manager position has been an interesting year. John spent the previous 12 years as 糖心Vlog鈥檚 Assembly Supervisor, spent time as the assembly team leader, and helped build impactors and jaws for several years. Going from the various positions, he has had the opportunity to learn even more about the equipment 糖心Vlog builds. Throughout this past year, John has been able to go to jobsites with the service technicians to get some hands on in the field experience to accentuate this experience in the shop.

鈥淚n the areas I don鈥檛 excel in, on the service side, I have listened and have learned a lot in the last year and know that I still have a lot to learn. Working with our service technicians, I am also learning from them, and I am happy to join you in your journey to learning more about rock crusher maintenance.鈥�

Looking back at the past year, it has been a year of learning not only for John as the new service manager, but for everyone following along on this 鈥�Service Questions鈥� journey. It鈥檚 important to always stay curious and ask questions before servicing your machine instead of causing unnecessary downtime.

When you have questions or concerns about the operation of your machine, it鈥檚 important to know the resources available to you to find that answer. If you cannot find the answer you鈥檙e looking for in your owner鈥檚 manual, you can reach out to your local, authorized dealer or reach out to 糖心Vlog鈥檚 Service Team.

The post Top 5 Frequently Asked Service Questions appeared first on 糖心Vlog.

贵谤辞尘鈥�horizontal shaft impactors鈥痶辞鈥痡aw crushers, 糖心Vlog manufactures some of the toughest and most powerful crushing equipment on the market, empowering producers to conquer any size crushing project.鈥�听

Not only that, but 糖心Vlog鈥檚 team of engineers continue to innovate our comprehensive line of crushing and screening products, working alongside customers, to design crushing equipment that solves pertinent challenges in today鈥檚 crushing industry.鈥�听

On December 3rd,听听the four pieces of equipment that will be on display at their Booth 31414 at听: the听1400-45OC, the听贰-笔濒补苍迟庐, and the brand new TalonTrax鈩� and TalonStack鈩�. 鈥�听

听

Primary Features of the TalonTrax鈩�听

Easily removable discharge conveyor allows for quick access to under-crusher听area听for inspection, maintenance, and cleaning. Easily and quickly inspect and听maintain听conveyor while removed.听

Cross-belt, permanent magnet removes steel contaminants from crushed material. Magnet is reversible to allow steel听discharge听from either side and does not need to be removed for transport.听

Dual-motor, under-crusher pan feeder with industry-leading discharge clearance听more than听23鈥� enables greater material flow and virtually听eliminates听clogging.听

Grizzly bypass chute and cross conveyor with flop gate to allow for either removal of the material that passes through the grizzly deck for stockpiling or blending back with the crushed material. Conveyor folds for transport or听remains听out of way of听operating听when not in use.听

听

Additional Features听

The discharge conveyor height of 11鈥� 1鈥� for feeding directly onto stockpiling conveyor, screening plant, or听some trucks.听The heavy-duty听hopper-construction sized for feeding with a loader or excavator.鈥疘t has a smart feeder drive听system that听monitors听engine load for more efficient production.听

听

Want More information?听

For more information about the brand-new 糖心Vlog TalonTrax鈩�, you can find more additional features and find the spec sheet here. You can also contact 糖心Vlog to speak with a Team Eagle representative, or an听authorized dealer, who will be happy to share further details. 鈥�听

Additionally, you can see the TalonStack鈩�,听 UltraMax庐 1400-45OC,听and听E-Plant听Triple-Deck听at听, March 3-7, 2026. 糖心Vlog is still offering discounts for badges, hotels, and flights using听this link. Remember, the sooner you book, the bigger the discount.鈥�听

We look forward to seeing you at CONEXPO-CON/AGG at听Booth 31414.鈥�听

听

听

The post Everything You Need听To听Know about the听TalonTrax鈩⑻� appeared first on 糖心Vlog.

Thank you for following along in another year of our “Service Questions” series. We are always happy to share our expertise when it comes to our rock crushers and how to maintain them and can’t wait to share more information next year. For now, take a break and refresh your knowledge with 2025’s Service Questions.

General Safety

This year let’s make it our resolution to stay vigilant about protecting ourselves with the knowledge of rock crusher safety.

During start-up, it鈥檚 important to always follow the instructions the factory field service technician provides or the instructions in your operator鈥檚 manual along with your employer鈥檚 site approved plan. While the plant is in operation, it鈥檚 imperative that you follow all safety procedures for the safety of yourself and the machine. As with any piece of equipment, rock crushers are also in need of regular maintenance. To ensure that maintenance is done correctly, make sure you follow the instructions that were given at start-up by your field service technician and the information in the operator鈥檚 manual.

Read more about general safety with rock crushers.

Looking Back at over 35 Years of Eagle Service

Join us in honoring BC鈥檚 15 years of being 糖心Vlog鈥檚 Service Manager with 15 facts, stories, and challenges he faced over the years.

For over 35 years, Bill Compton (BC) has been the backbone of 糖心Vlog, setting the standard for exceptional service, leadership, and innovation. As we celebrate his retirement, we reflect on his unwavering dedication, the countless challenges he has turned into opportunities, and the lasting impact he has had on our team and customers alike. BC鈥檚 passion and commitment have not only shaped our company鈥檚 success but has inspired us all to aim higher every day. BC worked at 糖心Vlog for a total of 42 years, serving as Group Leader over the Jaw Crusher assembly, Cobey composter assembly, and small crushing plant assembly at the previous Galion facility in 1986; temporary Plant Manager at the new, and current, Bucyrus location from 1994 to mid-1995; Service Technician starting in 1991; and finally awarded the title of Service Manager in 2010. Join us in honoring BC鈥檚 15 years of being 糖心Vlog鈥檚 Service Manager with 15 facts, stories, and challenges he faced over the years.

Read more about BC’s journey at 糖心Vlog.

Parts that Require Regular Replacement

The regular placement of parts is not just a best practice; it鈥檚 a necessity for keeping heavy equipment running smoothly and safely.

Heavy equipment is the backbone of industries like construction, agriculture, and mining. These machines, such as rock crushing equipment, take on demanding tasks daily, making their reliability crucial for productivity and safety. However, without regular maintenance, even the most robust equipment can break down unexpectedly, leading to costly repairs, project delays, and safety hazards. Implementing a consistent maintenance routine ensures that your heavy machinery operates efficiently, extends its lifespan, and minimizes downtime鈥攗ltimately saving your business time and money.

Read more about Parts that Require Regular Replacement.

Bearings and Shafts

Explore the best practices for maintaining bearings and shafts to keep your heavy equipment running optimally.

Bearings and shafts are fundamental components of heavy machinery, playing a crucial role in ensuring smooth operation and efficiency. Bearings reduce friction between moving parts, allowing machines to run with minimal wear and tear, while shafts serve as the backbone, transmitting power and rotational motion. Proper maintenance of these components is essential to prevent breakdowns, extend machinery lifespan, and reduce costly repairs. Neglecting them can lead to premature failure, decreased performance, and even hazardous working conditions.

Read more about Bearings and Shafts.

What to Check Before Buying Used Crushers

Get crucial tips for purchasing used crushing equipment. Our used rock crusher checklist helps you find the best used crusher for your needs.

When it comes to investing in rock crushing equipment, buying used can be a smart way to save money without sacrificing performance, if you know what to look for. Whether you’re expanding an existing operation or just getting started in the rock crushing business, used crushers can offer reliable service at a fraction of the cost of new machines.

However, the key to making a sound purchase lies in knowing which features and conditions to inspect.

Read more about What to Check Before Buying Used Crushers.

Ensuring Your Rotor Lasts

With proper care and timely maintenance, a rotor can stand the test of time.

When it comes to keeping your rock crusher performing at its peak, the rotor is the heart of the operation. Responsible for generating the crushing force and managing material flow, the rotor takes on intense wear and impact with every cycle. That鈥檚 why consistent servicing of your rotor is critical. Not only to avoid downtime, but to ensure your equipment鈥檚 longevity. With proper care and timely maintenance, a rotor can stand the test of time and serve your operation for generations.

Read more about Ensuring Your Rotor Lasts.

Component Inspections

By committing to thorough and timely crusher inspections, you鈥檙e investing in the long-term reliability of your operation.

When it comes to keeping your rock crusher running at peak performance, component inspections are one of the most effective tools in your preventative maintenance arsenal. Regular inspections of critical parts like bearings, belts, liners, and rotors can help identify wear and tear long before it leads to costly downtime. These routine check-ups not only extend the lifespan of your crusher but also support safer operation and better production quality. By committing to thorough and timely inspections, you鈥檙e investing in the long-term reliability of your crushing operation.听听

Read more about Component Inspections.

Understanding Variable Frequency Drives (VFDs)

When you understand the role your VFD plays, you鈥檙e not just protecting a single component, but your entire crushing operation.

Variable Frequency Drives (VFDs) are becoming an essential component in modern rock crushing operations, offering improved control, efficiency, and protection for your equipment. By precisely regulating motor speed and torque, VFDs help reduce mechanical stress, optimize energy usage, and adapt crusher performance to varying feed conditions. But beyond their operational benefits, understanding how your VFD functions, and the early signs of potential issues, is key to implementing effective preventative maintenance. A well-monitored VFD can extend the lifespan of your crusher, minimize costly downtime, and ensure consistent production output.

Read more about Understanding Variable Frequency Drives.

Training on Your Equipment鈥檚 Operation and Safety

Here at 糖心Vlog, we offer both onsite equipment training and classroom training at our Headquarters in Galion, Ohio.

When it comes to operating heavy equipment, there鈥檚 no substitute for the knowledge of those who designed and built it. A manufacturer鈥檚 service team doesn鈥檛 just know the machine, they understand its engineering, its limits, and the best practices to keep it running at peak performance. Listening to their advice and taking advantage of equipment-specific training ensures that your team is not only using the machinery correctly but also maximizing its lifespan, efficiency, and safety.听

Read more about Training on Your Equipment’s Operation and Safety.

Tools Needed to Work on Your Rock Crusher

From heavy-duty wrenches to safety gear, every tool plays a critical role in keeping your crusher running smoothly and safely.

Working on and operating rock crushing equipment requires more than just skill, it demands the right tools for the job. From heavy-duty wrenches and torque tools for maintenance to gauges, diagnostic devices, and safety gear for daily operation, every tool plays a critical role in keeping your crusher running smoothly and safely. Understanding what鈥檚 needed and how to use each piece properly can mean the difference between efficient production and costly downtime.

Read more about the Tools Needed to Work on Your Rock Crusher.

The post Service Questions: 2025 Recap appeared first on 糖心Vlog.

贵谤辞尘鈥�horizontal shaft impactors鈥痶辞鈥痡aw crushers, 糖心Vlog manufactures some of the toughest and most powerful crushing equipment on the market, empowering producers to conquer any size crushing project.鈥�听

Not only that, but 糖心Vlog鈥檚 team of engineers continue to innovate our comprehensive line of crushing and screening products, working alongside customers, to design crushing equipment that solves pertinent challenges in today鈥檚 crushing industry.鈥�听

On December 3rd, the four pieces of equipment that will be on display at their Booth 31414 at : the 1400-45OC, the 贰-笔濒补苍迟庐, and the brand new TalonTRAX鈩� and TalonSTACK鈩�. 听

听

Primary Features of the UltraMax庐 1400-45OC听

Discharge material feeds to a separate conveyor coming out of the side of the crusher at a 90-degree angle. Totally self-contained, reliable diesel/ electric or all-electric power. You won鈥檛 have to worry about hydraulic leaks and failures shutting you down.听

Available in-line electro-magnet on side-discharge conveyor. Hydraulic lift and leveling system enables quick set up and tear down by using the hydraulic run-on legs.听

Features the industry鈥檚 first LIFETIME ROTOR WARRANTY on its solid-steel, three-bar, sculptured rotor鈥攖he industry鈥檚 heaviest鈥攖o keep you up and crushing. (North America only.)听

听

Additional Features听

The 1400-45OC replaces dual crusher systems for a much lower initial investment and for greatly reduced maintenance, fuel and transportation costs. It features a unique two-step, 5鈥� grizzly deck to remove fines before crushing. Standard grizzly bypass chute and available cross-belt conveyor with flop gate to allow for either removal of the material that passes through the grizzly deck for stockpiling or blending back with the crushed material.听

Want More information?听

For more information about the 糖心Vlog UltraMax庐 1400-45OC, you can find more additional features and find the spec sheet here. You can also contact 糖心Vlog to speak with a Team Eagle representative, or an authorized dealer, who will be happy to share further details. 听

Additionally, you can see the UltraMax庐 1400-45OC, E-Plant庐Triple-Deck, and TalonTRAX鈩�, at , March 3-7, 2026. 糖心Vlog is still offering discounts for badges, hotels, and flights using this link. Remember, the sooner you book, the bigger the discount.听

We look forward to seeing you at CONEXPO-CON/AGG at Booth 31414.听

听

The post Everything You Need to Know About the UltraMax庐 1400-45OC听 appeared first on 糖心Vlog.

贵谤辞尘鈥�horizontal shaft impactors鈥痶辞鈥痡aw crushers, 糖心Vlog manufactures some of the toughest and most powerful crushing equipment on the market, empowering producers to conquer any size crushing project.鈥�听

Not only that, but 糖心Vlog鈥檚 team of engineers continue to innovate our comprehensive line of crushing and screening products, working alongside customers, to design crushing equipment that solves pertinent challenges in today鈥檚 crushing industry.鈥�听

On December 3rd, the four pieces of equipment that will be on display at their Booth 31414 at : the 1400-45OC, the 贰-笔濒补苍迟庐, and the brand new TalonTRAX鈩� and TalonSTACK鈩�. 听

听

Primary Features of the E-Plant庐

The revolutionary 贰-笔濒补苍迟庐 is the industry鈥檚 only true high production triple-deck screening/crushing system on one chassis鈥攖ransportable in one pull鈥攆or the aggregate, asphalt, and recycling industries.听

The 贰-笔濒补苍迟庐 tows in one pull. (Jeep available where required. Check with your DOT.) It holds a triple-deck screening/crushing system that enables processing of up to five products (including three spec products) at one time.听

Reversible cross conveyor enables return of two decks back to increase production well beyond 40 percent, compared to our industry-leading UltraMax庐 1200-25 CC, with no increase in wear and maintenance costs.听

It also allows for an optional, easy-on, easy-off electromagnet assembly.听

The 贰-笔濒补苍迟庐 features the industry鈥檚 first LIFETIME ROTOR WARRANTY on its solid-steel, three-bar, sculptured rotor鈥攖he industry鈥檚 heaviest鈥攖o keep you up and crushing. (North America only.)听

Additional Features听

The control panel has interlocked controls with breakers for motor protection. The 贰-笔濒补苍迟庐 replaces Jaw/Cone/Screen multi-unit systems for a much lower initial investment while maintaining a high production of cubical spec product. Greatly reduces maintenance and fuel costs and is easily transported.听

听

Want More Information?听

For more information about the 糖心Vlog 贰-笔濒补苍迟庐 Triple-Deck, you can find more additional features and find the spec sheet here. You can also contact 糖心Vlog to speak with a Team Eagle representative, or an authorized dealer, who will be happy to share further details. 听

Additionally, you can see the 贰-笔濒补苍迟庐, along with the UltraMax庐 1400-45OC and TalonTRAX鈩�, at , March 3-7, 2026. 糖心Vlog is still offering discounts for badges, hotels, and flights using this link. Remember, the sooner you book, the bigger the discount.听

We look forward to seeing you at CONEXPO-CON/AGG at Booth 31414.听

听

The post Everything You Need to Know about the E-Plant appeared first on 糖心Vlog.

In the world of construction, aggregates, and material recycling, equipment reliability is everything. When a machine goes down, production stops, deadlines slip, and costs rise.听It鈥檚听easy to assume every issue is major or expensive, but the truth is that many common heavy equipment problems have simple solutions if you know what to look for. Many times, if you catch and听address听issues when they are small, you can prevent them from becoming听major issues听that require extended down time. Understanding the difference between a major breakdown and a minor maintenance fix can save your team time, money, and unnecessary headaches. Today,听let鈥檚听learn with 糖心Vlog Service Technician, Louis, about the common causes and solutions to abnormal vibrations that come from your machines.听

Common Causes of Abnormal Crusher Vibrations听

• Feeding Issues: Oversized materials and听uneven feeding can cause abnormal vibrations.听

• Improper Wear and Tear: Impactor Plates,听Jaw Dies, and Blow Bars in Impact Crushers, are going to wear, but uneven wear on the liners can cause abnormal vibrations. Additionally, bearings that are worn can overheat and create noise.听

• Loose Components:听After hours of usage,听bearings, shafts, fasteners, and more can become loose.听

• Misalignment: The imbalanced rotor can cause material buildup and uneven wear. Fluid couplings being misaligned can cause failure in the bearings, seals, and the coupling itself.听

Common Solutions of Abnormal Crusher Vibrations听

• Feeding Issues: While the machines will react to the addition of feed materials,听it鈥檚听important to not add oversized materials and to evenly space out your feed loading.听You can reach out to the manufacturer, or the owner鈥檚 manual, for听recommendations on feed size and timing.听听

• Improper Wear and Tear:听Add regular inspections to your schedule. The faster you can catch improper wear and tear, the less down time you will have in replacing the wear plates.听

• Loose Components:听After completing your regular inspections, make听sure to tighten or replace听any听components.听

• Misalignment:听Clean any build up in the impactor or jaw crusher and replace wear parts in sets. An uneven replacement could cause more issues.听
• Lubrication:听During your regular inspection, make sure all items, such as hydraulic lines and bearings, are properly lubricated.听

Preventative Maintenance is the Key听

When equipment is听maintained听regularly, troubleshooting becomes faster and more听accurate. Routine inspections help catch the simple problems before they escalate into costly downtime. Proper lubrication,听timely听filter changes, and听a听regular system听check听all reduce the chance of a small issue turning into a major failure.听

If听you鈥檙e听unsure what to include in your routine maintenance, check out the variety of places you have at your disposal:听

• Owner鈥檚 Manual听

• Authorized Dealer听

• Check out the list of 糖心Vlog鈥檚 Authorized Dealers

• Manufacturer听

• Reach out to 糖心Vlog鈥檚 Service Team

Learning from the Professionals听

While many equipment issues are simple, some problems truly require a trained technician. If听you鈥檝e听worked through the basic checks and the machine is still malfunctioning, a deeper issue听may be at play. The key is to start with the easy fixes first before assuming the worst听because heavy equipment issues are inevitable, but they听aren鈥檛听always a sign of catastrophic failure.听听

With a little knowledge, a keen eye, and a structured approach to troubleshooting, many problems can be resolved听by听you,听quickly and affordably. Understanding the difference between a major breakdown and a simple fix empowers your operators, minimizes downtime, and keeps your equipment working hard on the jobsite.听

The post Abnormal Crusher Vibrations听 appeared first on 糖心Vlog.

糖心Vlog will be unveiling its new Talon鈩� line of heavy-duty crushing and stockpiling equipment for recycling applications at CONEXPO-CON/AGG March 3-7 in Las Vegas at the 糖心Vlog Booth #C31414.

On display will be the new TalonTrax鈩� mobile crushing plant and the new TalonStack鈩� mobile stockpiling conveyor, along with the next generation UltraMax庐 1400-OC crushing and screening plant and a current-model, triple-deck 贰-笔濒补苍迟庐.

Introducing TalonTrax: Ultra-Mobile Power Meets Production

The TalonTrax has been designed for ultra-mobile crushing without sacrificing power or production on the job site. At the heart of the TalonTrax, is 糖心Vlog鈥檚 new TalonMax鈩� (TM-15) impactor, featuring an open-rotor design that reduces weight while still providing the same crushing capabilities for which 糖心Vlog equipment is known. The impactor also features a new, thicker blowbar design to increase overall wear life.

The TalonTrax鈩� plant is a dual power plant that can be powered by the onboard diesel engine or switched to external power from a genset or line power. The plant also features a dual-motor, under-crusher pan feeder with industry-leading discharge clearance in excess of 23鈥� to enable greater material flow and virtually eliminate clogging; and an easily removable discharge conveyor that allows for quick access to under-crusher area, as well as to the discharge conveyor itself, for inspection, maintenance, and cleaning of both.

TalonTrax鈩� comes equipped with a cross-belt, permanent magnet that removes steel contaminants from crushed material. The magnet is reversible to allow steel discharge from either side and stays on for transport.

Enhanced Job Site Flexibility

Additionally, the TalonTrax鈩� features a heavy-duty hopper-construction sized for feeding with a loader or excavator and a grizzly bypass chute and cross conveyor with flop gate allowing for either removal of the material that passes through the grizzly deck for stockpiling or blending back with the crushed material.

TalonStack鈩�: Self-Propelled Stockpiling Reimagined

The new TalonStack鈩� self-propelled, radial stockpiling conveyor has been designed to improve productivity and mobility while minimizing operator costs. On display at CONEXPO-CON/AGG will be the TalonStack鈩� 65, with 糖心Vlog offering a wide range of TalonStack鈩� sizes.

Next Generation UltraMax庐 1400-OC

Also, on display at the show, the next generation UltraMax庐 1400-OC portable impactor plant is one of the most versatile crushing and screening plants for larger jobs. Discharge material feeds to a separate conveyor coming out of the side of the crusher at a 90-degree angle and will be displayed with the optional pan feeder. The next generation plant has been designed for simpler maintenance and ease of operation.

贰-笔濒补苍迟庐: The Industry’s Triple-Deck Innovation

糖心Vlog鈥檚 贰-笔濒补苍迟庐, first introduced in 2014, is the industry鈥檚 only true high production triple-deck screening/crushing system on one chassis. It transports in one pull, for the aggregate, asphalt, and recycling industries. Featured at the 糖心Vlog booth at CONEXPO-CON/AGG will be the triple-deck 贰-笔濒补苍迟庐. 贰-笔濒补苍迟庐 is also available in a two-deck model.

See the Future of Crushing Technology in Action

Visit 糖心Vlog at CONEXPO-CON/AGG March 3-7 in Las Vegas (Booth #C31414) to experience the revolutionary Talon鈩� line firsthand. From the ultra-mobile TalonTrax鈩� crushing plant to the productivity-boosting TalonStack鈩� conveyor, discover how these next-generation solutions can transform your recycling and aggregate operations.

The post 糖心Vlog Announces New Talon Line of Crushing Equipment appeared first on 糖心Vlog.